Mountains

Mountains

Wednesday, May 10, 2017

Genuine Buddy 125 Maintnance Notes (Intro)

It's not differed maintenance unless it's past the wear bars. 

....Also, I put in a new battery and regularly change the oil.

I've owned and ridden a 2007 Genuine Buddy 125 scooter for 4 5 years. The prior owner noted that it had spent it's formative ~3,000 miles in Oklahoma (It still has a University of Oklahoma parking sticker) rain and dust. He was getting rid of it mostly due to not liking to ride in the suburban hellscape that is the DC metro area and because his wife’s abdomen had started bulging over the past few months: As such he was divesting himself of every symbol of freedom, joy, and dreams of a happy future he owned so as to better situate himself to his new dreary reality.

Since then, I'd run down the battery, changed the oil, added a windscreen, watched the bike fall over in the driveway and break the windscreen, and overall enjoyed a mostly easy riding experience.

By 6,000 miles several issues had become apparent.
  1. The rear tire was past the wear bars and wouldn't pass safety inspection
  2. The ugly windscreen gave safety inspectors pause and caused inspection to take twice as long, also made the bike look ugly
  3. The exhaust was rusting
  4. The seat latch rarely latched
  5. Having done the Voodoo Buddy Deadlight mod to my wifes 2009 buddy, I was inspired to recreate the effort on the 2007. I had bought all the parts except the LED lights themselves whien I did the 2009, but never finished the job on the 2007.
  6. I was never able to get the transmission to smoothly cycle, resulting in mild surging behavior: the rollers needed to be replaced.
  7. I want a bigger motorcycle, and fixing 1-6 seemed likely to increase the sales premium I can achieve
Thus, I've embarked on series of projects over the past few months to improve the bike. After an initial, rather long and rambling single post, the tail of fun and excitment has been broken into individual pages, one per project.


Part 1: Rear Tire

Part 2: Wind Screen

Part 3: Muffler

Part 4: Seat Latch

Part 5: Deadlights


Part 6: Sliders and Belt

(And I ranted in detail about Genuine Buddy oil filters here)





Tuesday, May 9, 2017

Taking Bets

I'd bet that Google is going to close down Blogger next. I feel like I get evicted from whatever platform I'm using on a decadal scale.

Monday, February 13, 2017

Thoughts fixing on Stuck CD/DVD Drive Trays

I built my computer with two DVD Drives that I had reused from other other computers. This is handy because when I have digital media to read or write from a disc, there's normally more than one required, and because, short of Blu-ray, the drive speeds mostly haven't changed since 2007 or so. I could have added a third, but the motherboard does not have a second PATA channel to support it. Thus there is a third drive, probably the only one that was purchased alone, in a USB enclosure.

The two drives in the PC are
Samsung SM-348B CDRW/DVD
NEC DVD +/- RW ND-3450A
And the Drive in the enclosure is a
LiteOn DVD +/- RW -RAM DH-20A4P

On a recent audiobook transcription project, I found that both the Samsung SM-348B and the LiteOn DH-20A4P no longer wanted to open without mechanical assistance. Some investigation showed that depolymerization of rubber parts (where the rubber deforms and becomes sticky) was the culprit in both instances, though the problems were distinct for each device.

The Samsung has a foam rubber gasket around the front of the drive tray, presumably to keep dust from getting into the mechanism. When the drive ejects, this seal was getting caught on the front bezel of the drive as the tray tried to slide out, blocking it's path. I could help it eject the catching the tray with my fingernail as it pushed out a bit after I hit the eject button. The front part of the tray can be removed by gently lifting two tangs on the bottom and sliding it upward, allowing the gasket to be removed. Upon removal, the gasket was obviously deformed, smushed wide, and quite sticky, which was probably helping it latch on to keep the tray from opening. I trimmed the gasket with scissors and reversed it so the sticky part faced the front of the drive tray, yielding a non-sticky surface between the tray/bezel contact. There still some residual smudge on the drive tray, but it opens reliably now.

The LiteOn was more of a humdinger. Hitting the eject button yielded some small mechanical noises as the mechanism tried to open, but the tray didn't budge and it couldn't be coaxed to open by pulling. It required a strong assist by using a paper clip. I took the metal enclosure off the drive, yielding it's plastic frame and internals. There was nothing apparently wrong. Had I tested at this point, I would have found that it ejected smoothly in this state. However, I incorrectly assumed a lubrication issue and applied some thin silicone grease to all the sliding surfaces in the drive. After lubrication, I powered the drive and found the naked mechanism worked smoothly, concluding I had solved the problem, the drive was reassembled and put back on the PC, where it promptly refused to open, as before.

Several repeat inspections failed to find the problem. Testing showed that the drive would open when naked, but when the protective metal shell was in place, it would get stuck closed. I initially concluded that the rubber drive band, a square belt of about 25 mm diameter, between the motor and the tray gear train, was worn out. This part fails commonly enough that they can be purchased on Amazon. This seemed rational as I could see the spindle spinning under the belt when the drive was trying to open the tray. However, the belt was under good tension and everything looked OK. It also did not explain why the drive worked fine when the case was removed. The drive also ejected ok when the plastic frame was manually torqued in various ways, so it seemed unlikely that metal enclosure (which was in find shape) was distorting the drive mechanism.

A google search showed a post in the digitalFAQ forum where a user complained that they were having problems with a drive leaving "gunk" on the center of CDs, and suggested that the drive spindle was sticking to the bearing in the top of the drive when a CD was not present. It took a moment (meaning, several hours) for the implications of this to sink in for me. The drive ejects by lowering the drive spindle to allow a clear path for the tray to slide forward. When a disk is inserted, the spindle raises and presses the disk into a bearing on the top of the drive house. If there's not a disk present, and the spindle is sticky, it will adhere to the drive housing lid (aha!). When a disk is present, there's a few millimeters travel which gives the mechanism enough momentum to break free.

Thus, I resolved to "solve" the LiteOn problem by storing the drive with a blank CD-R inside of it. If it starts having problems with ejecting, I'll probably employ the talcum powder trick to dry the rubber surface.





Friday, July 1, 2016

NoVa Roller Derby May 14, 2016: SuperNoVas vs York City Derby Dames

NoVa Roller Derby SuperNoVas vs York City Derby Dames Album

...Or you can just scroll down!

I'm hoping this set shows the additional effort I'm putting into pushing the quality up higher. In particular, the cropping, white balance, and sharpening have gotten more attention than in the past, where the entire batch was given to Imagemagick with a single set of parameters and nature took it's due course.

It's clear the camera's being flogged pretty hard when close cropped versions are examined, and the sharpening and white balance fixes just make it worse, and mottling of dark colors becomes pretty obvious... the tones in the shadows under the rim of helmets all look a little off.

I noticed I'm dutching the camera at times. generally to bring the horizontal axis parallel to the skaters attack angle with the ground, but other times completely arbitrarily. Part of this is likely that the depth compression at long focal lengths makes finding true horizontal hard, part of it is trying to make the skater look right in the frame, thereby making the crowd look funny, and part of it is just my own laziness and hurry to mash the shutter button.